Accessories for HV and EHV Extruded Cables

1. Front Matter

   Pages i-xxi

   PDF

2. Compendium of Accessory Types Used for AC HV Extruded Cables

   • Zensuke Iwata

   Pages 1-57

3. A Guide to the Selection of Accessories

   • Zensuke Iwata

   Pages 59-79

4. Interfaces in Accessories for Extruded HV and EHV Cables

   • Henk Geene

   Pages 81-96

5. Qualification Procedures for HV and EHV AC Extruded Underground Cable Systems

   • Jean Becker

   Pages 97-190

6. Cable Accessory Workmanship on Extruded High Voltage Cables

   • Kieron Leeburn

   Pages 191-256

7. Guidelines for Maintaining the Integrity of Extruded Cable Accessories

   • Eugene Bergin

   Pages 257-315

8. Feasibility of a Common, Dry Type Plug-in Interface for GIS and Power Cables above 52 kV

   • Pierre Mirebeau

   Pages 317-368

9. Test Procedures for HV Transition Joints for Rated Voltages 30 kV up to 500 kV

   • Marco Marelli

   Pages 369-400

10. Thermal Ratings of HV Cable Accessories

    • Henk Geene, Reinhard Schroth

    Pages 401-420

11. Test Regimes for HV and EHV Cable Connectors

    • Milan Uzelac

    Pages 421-528

12. Standard Design of a Common, Dry Type Plug-in Interface for GIS and Power Cables up to 145 kV

    • Pierre Mirebeau

    Pages 529-598

This CIGRE Green book on accessories for HV and EHV extruded cables covers relevant issues in cable system design, cable design, submarine cables including off shore generation connection. It provides comprehensive and unbiased information, essential recommendations and guidelines for design, installation, testing and maintenance of accessories to professionals through the exceptional expertise of the authors.

This publication is divided in two Volumes covering land and submarine applications, HVAC and HVDC systems, transitions from lapped cable systems to extruded cable systems, from OHL to UG cables and from cables to substations. It equips the reader with recommendations for testing, installation, maintenance, remaining life management. This Volume is dedicated to Components while Volume 2 deals with Land and Submarine AC/DC Applications.

The book compiles the results of the work achieved by several Working Groups and Task Forces of CIGRE Study Committee 21/B1, and Joint Working Groups and Joint Task Forces with other Study Committees. Many experts from Study Committees 21/B1 (Insulated Cables), 15/D1 (Materials and Emerging Test Techniques), 33/B3 (Substations), C3 (System Environmental Performance) and C4 (System Technical Performance) have participated in this work in the last 30 years in order to offer comprehensive, continuous and consistent outputs.

• EHV cables
• Extruded Cables
• HCAC and HVDC
• underground cable systems
• submarine cable systems
• Off Shore Generation Connection
• HV extruded cables

• Héricy, France

  Pierre Argaut

The Study Committee B1 of CIGRE (Insulated Cables) covers underground and submarine, AC and DC, Insulated Cable Systems. SC B1 (formerly SC 21) was established in 1927 and celebrated its 80th anniversary during the 2007 Study Committee meeting in Osaka (Japan).



Pierre Argaut was graduated as electrical engineer
from the “Institut d’Electrotechnique de Grenoble” in
1971. He joined Delle-Alsthom (HV Switchgear Manufacturer)
in November 1971 and took several positions
before heading the R&D Department on GIS. After
being operation manager of South European Pipeline,
he joined SILEC in 1988 and retired at the end of 2010.
His last position with SILEC was senior vice president.
In Study Committee B1 (Insulated Cables), Pierre
has held position of working group member
(21.09;21.06;21.07;21.17), French SC member, working
group convener (B1.19), special reporter (2010),
advisory group convener (Tutorial Advisory Group till
2010), and chairman of SC B1 from August 2010 to
August 2016. He received the Technical Committee
Award in 2000, the Distinguished Member Award in
2002, and the title of Honorary Member of CIGRE in
2016.

Policies and ethics