Energy Technology 2018

1. Front Matter

   Pages i-xxvi

   PDF

2. Energy Technologies and CO2 Management Symposium

   1. Front Matter

      Pages 1-1

      PDF

   2. Gas Hydrate-Based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process

      • Hossein Dashti, Xia Lou

      Pages 3-16

   3. Tar Removal from Hot Coke Oven Gas for H2 Amplification with in Situ CO2 Capture

      • Huaqing Xie, Qin Qin, Qingbo Yu

      Pages 17-26

   4. An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data

      • Shipeng Huang, Zhong Zheng, Xiaoqiang Gao, Shenglong Jiang, Zhaojun Xu

      Pages 27-38

   5. Preparation and Characterization of Activated Carbon from Waste Ion-Exchange Resin for CO2 Adsorption

      • Mengqi Wei, Qingbo Yu, Qiang Guo, Zongliang Zuo, Qin Qin

      Pages 39-49

   6. Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production

      • Will Sikora, Trevor Saldanha, Nawshad Haque

      Pages 51-64

   7. Direct Reduction of Copper Slag Composite Pellets Within Lignite Using Biomass as Binder

      • Zongliang Zuo, Qingbo Yu, Huaqing Xie, Qin Qin, Mengqi Wei

      Pages 65-75

   8. Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steelmaking Process

      • Maryam Ghodrat, Bijan Samali

      Pages 77-88

   9. The Reduction Kinetic of the Combined Cu-Based Oxygen Carrier Used for Chemical Looping Gasification Technology

      • Kun Wang, Weipeng Luan, Qingbo Yu, Qin Qin

      Pages 89-97

   10. Synergistic Effect Between Fat Coal and Poplar During Co-Pyrolysis with Thermal Behavior and ATR-FTIR Analysis

       • Qingyun Zhang, Shengfu Zhang, Rongjin Zhu, Shuxing Qiu, Yue Wu

       Pages 99-109

   11. Flow Characteristic of Two-Phase Bubble Reactor for Slag Waste Heat Recovery

       • Wenjun Duan, Qingbo Yu, Zhimei Wang, Tianwei Wu

       Pages 111-119

   12. Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets

       • Arun Prabhakar, Joanna Mielnicka, Mark Jolly, Konstantinos Salonitis

       Pages 121-132

   13. Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove

       • Fuming Zhang, Xin Li, Zurui Hu

       Pages 133-152

   14. An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace

       • Patrick E. Krane, Matthew John M. Krane

       Pages 153-164

   15. Waste Heat Recovery from Aluminum Production

       • Miao Yu, Maria S. Gudjonsdottir, Pall Valdimarsson, Gudrun Saevarsdottir

       Pages 165-178

   16. Leaching and Carbonation of Electric Arc Furnace (EAF) Slag Under a Microwave Field for Mineral Carbonation

       • Zhibo Tong, Guojun Ma, Xiang Zhang, Junjie Liu, Langsha Shao

       Pages 179-190

   17. A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity Under Visible-Light Irradiation

       • C. Jun, Z. Jing, L. Qihou, Z. Yumeng, L. Hui

       Pages 191-204

   18. Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity

       • Wen Pan, Xia Zhao, Si-bin Zhang, Jun-hua Zhao, Huai-ying Ma, Zhi-xing Zhao

       Pages 205-214

3. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session

   1. Front Matter

      Pages 215-215

      PDF

This collection focuses on energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The volume also covers various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers addressing renewable energy resources for metals and materials production, waste heat recovery and other industrial energy efficient technologies, new concepts or devices for energy generation and conversion, energy efficiency improvement in process engineering, sustainability and life cycle assessment of energy systems, as well as the thermodynamics and modeling for sustainable metallurgical processes are included. This volume also includes topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering, sustainable technologies in extractive metallurgy, as well as the materials processing and manufacturing industries with reduced energy consumption and CO2 emission. Contributions from all areas of non-nuclear and non-traditional energy sources, such as solar, wind, and biomass are also included in this volume.
Papers from the following symposia are presented in the book:
Energy Technologies and CO2 Management
Advanced Materials for Energy Conversion and Storage 
Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session
Solar Cell Silicon
Stored Renewable Energy in Coal

• Materials Science
• Energy Materials
• Recycling and Sustainability
• Waste Heat Recovery
• Energy Technology
• Energy Generation and Conversion

• Queensland University of Technology, Brisbane, Australia

  Ziqi Sun

• Northeastern University, Shenyamg, China

  Cong Wang

• Idaho National Laboratory, Idaho Falls, USA

  Donna Post Guillen

• IND LLC, South Jordan, USA

  Neale R Neelameggham

• University of Alaska Fairbanks, Fairbanks, USA

  Lei Zhang

• Purdue University, West Lafayette, USA

  John A. Howarter

• Nucor Steel, Blytheville, USA

  Tao Wang

• Massachusetts Institute of Technology, Cambridge, USA

  Elsa Olivetti

• ArcelorMittal Global R&D, East Chicago, USA

  Mingming Zhang

• Reno, USA

  Dirk Verhulst

• Harvard University , Watertown, USA

  Xiaofei Guan

• Gopher Resource, Tampa, USA

  Allie Anderson

• Al Isra University, Amman, Jordan

  Shadia Ikhmayies

• University of Utah, Salt Lake City, USA

  York R. Smith

• LG Fuel Cell Systems, North Canton, USA

  Amit Pandey

• The Pennsylvania State University, University Park, USA

  Sarma Pisupati

• Beihang University, Beijing, China

  Huimin Lu

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents. 

Policies and ethics