Overview
- This best selling book on creating a robot from common parts is now in its third edition.
- In Robot Building for Beginners, Third Edition, any motivated person can be taught the basics so that they will learn to build a robot the size of a lunch box to autonomously walk.
- Along the way you will learn the basics of wiring, electronics, mechanics and tooling so that you have the necessary skills to create more and more advanced robots.
- Finally you will learn an optional bit about 3D printing, as some of the parts can be 3D printed.
Access this book
Tax calculation will be finalised at checkout
Other ways to access
Table of contents (29 chapters)
About this book
Robot Building for Beginners, Third Edition provides basic, practical knowledge on getting started in amateur robotics. There is a mix of content: from serious reference tables and descriptions to personal stories and humorous bits.
The robot described and built in this book is battery powered and about the size of a lunch box. It is autonomous; that is, it isn't remote controlled.
The book is broken up into small chapters, suitable for bedtime (or bathroom) reading.
The characteristics and purposes of each major component (resistor, transistor, wire, and motor) are described, followed by a hands-on experiment to demonstrate. Not only does this help the reader to understand a particularpiece, but it also prepares them with processes to learn new parts on their own. An appendix offers an introduction to 3D printing and parts of the robot can, as an alternative, be "printed" using a 3D printer.
The master project of the book is a simple, entertaining, line-following robot.
About the author
Bibliographic Information
Book Title: Robot Building for Beginners, Third Edition
Authors: David Cook
DOI: https://doi.org/10.1007/978-1-4842-1359-9
Publisher: Apress Berkeley, CA
eBook Packages: Professional and Applied Computing, Apress Access Books, Professional and Applied Computing (R0)
Copyright Information: David Cook 2015
Softcover ISBN: 978-1-4842-1360-5Published: 27 August 2015
eBook ISBN: 978-1-4842-1359-9Published: 02 September 2015
Edition Number: 3
Number of Pages: XXX, 458
Number of Illustrations: 464 b/w illustrations
Topics: Hardware and Maker, Computer Hardware